Generating between 65 to 115 lumens of light per each watt of consumed electricity, metal halide grow light lamps are considered to have high efficiency. MH lights produce light, which is very close to the natural sunlight with the rich blue spectrum. Due to this, MH lamps support vegetative growing in the most desired way – when plants have many leaves on the stem with short internodes.

Structurally, metal halide lamp is a vacuum glass tube. There is also an arc tube inside, filled with mercury and other metals in iodine form. Under the influence of electric current, those metals start to generate light and heat intensively. Though metal halide bulbs can be either transparent or coated with phosphorus, the first type is more preferred for the indoor gardening, since it produces very bright light.

There are different sizes of metal halide lamps, starting from 70watts and finishing with 1500 watts. However 250w, 400w and 1000w are modifications, most commonly used in hydroponics systems gardening. In order to make MH light to work, it is necessary to use a ballast, designed for a particular bulb size. Ballast is, in fact, a transformer, which decreases voltage to some predefined amount.

The lamps can work only in the positions they were designed for. Those marked with BU or BD should be used only in vertical position; while those lamps, which carry HOR sign, are for horizontal application. Besides, there are also universal (U) lamps, which can operate in either position. 

There are also many different styles of metal halide lamps available on the market today. Along with typical or regular MH bulbs, there are also Super Bulbs, which can produce up to 10-12% more light than ordinary bulbs.

Regular metal halide bulbs should be replaced after about 18 months or 9500-10000 hours of use. Super bulbs are less durable and should be replaced more frequently – approximately after 12 months or 6500 hours of use. These recommendations apply if grow lights will work 18 hours daily.

The most widely-spread growing medium is, perhaps, rockwool. Originally used for insulation purposes and also known as mineral insulation, rockwool was first used as growing medium by Dane gardeners. Now, it is frequently used for drip-style indoor gardens around the globe.

Rockwool is produced by a process similar to making cotton candy: a particular mixture of sand and rock is melted and then turned into fibers by spinning the mixture to form products of multiple shapes and dimensions, from 1″ starter cubes and up to large slabs of  3″x12″x36″ in size. The variety of available forms and sizes turns rockwool into one of the most widely-used growing mediums.

Key advantages, as well as disadvantages, of this popular growing medium are listed below.

Rockwool’s Strong Points

HOLDING WATeR – rockwool as a growing medium in hydroponics systems is capable of holding a large amount of water. This creates an additional protection for situations, when water is not supplied because of power outages or failures in pumping or other gardening equipment.

ACCUMULATING AIR – up to 18 % of air are constantly kept by rockwool. Due to this capability, there is a very little risk to over water rockwool; besides, the plants are always supplied with enough amount of oxygen.

MULTIPLE SHAPES AND SIZES AVAILABLE – whether it is a small 1″ cube for seeds propagation or a large 3×12x36 inches slab for huge plant, rockwool offers a wide variety of shapes and sizes to choose from. Besides, loose rockwool is also available, designed for filling different plant containers.

NO DUST AND EASY TO USE – since rockwool maintains its form almost perfectly, it cannot be scattered accidentally. Besides, usually packed into plastic rockwool is a very clean material that is easy and comfortable to work with.

Rockwool’s Weak Points

NOT A “GREEN” MATERIAL – rockwool is claimed to be not environment-friendly material, because of its almost indefinite time of breakdown.

HEALTH HAZARDS – rockwool particles and fibers pose serious health danger, especially for human lungs. That is why it is necessary to wear a protective dust mask, while working with rockwoll.

pH PROBLEMS – because of rockwool’s high pH level, it is necessary to balance pH level in the nutrient solution properly and make it suitable for the plants, you are growing. In general, the use of rockwool requires more routine work to keep pH level of your nutrient solution at steady level.

LONG PRE-SOAK PERIOD – before rockwool can be used in the hydroponic system, it should be soaked for at least 24 hours beforehand. Other growing media usually do not require pre-soaking, it is enough just to well-water them.

Along with water, hydroponics plant nutrients, CO2 and oxygen, grow lights is the key basic component, required by plants to live. Providing additional light is necessary for indoor gardening. Furthermore, light should resemble the sunlight as much as possible. The major concern with other types of lights is that they do not produce light in the appropriate spectrum, required by plants.

Being the most efficient bulbs, HPS bulbs are commonly used by gardeners. Producing light in red and yellow spectrum, light generated by high pressure sodium lamps resembles the natural sunlight during autumn. Due to this peculiarity, HPS light is the best for promoting plants blooming. However, some plants may react negatively to this type of light, growing with oblong stem, etc. To address that issue, new HPS bulbs with color correction have been developed. For example, Son Argo feature properly balanced light spectrum, which suits perfectly for the needs of indoor gardening.

High pressure sodium grow lamps are made of a semi-transparent ceramic arc tube, filled with a mixture of sodium, mercury, and xenon. The arc tube is placed into the protective outer glass shield, similarly to metal halide bulbs. The power ranges of HPS bulbs vary from 35w to 1000w, while the most popular are 250w, 400w, 600w and 1000w.

HPS bulbs are more durable in comparison with MH bulbs: they can be replaced once every 24 months. Though HPS grow lights lose their brightness slowly, in order to keep the brightness at the steady level, it is still recommended to replace the bulb within the specified period.

Among the brand new types of grow lights are sulfur lights, which are said to feature extremely high brightness and effectiveness. However, these bulbs are still rare on the market in view of the high price, so it is early to evaluate their practical value for those gardeners, for whom indoor hydroponics growing remains a hobby.

One can enjoy hydroponics gardening any season of the year, but it is especially rewarding during the cold and dark winter days. Being a type of indoor gardening, this system implies growing of plants in a special growing medium, supplied with nutrient solution, instead of soil. Similarly to other indoor gardening methods, with hydroponics gardening it is necessary to use grow lights, which allow plants to grow, make food and reproduce themselves through flowers or fruits. For this purpose HID lights are commonly used. There are several types of HID or high-intensity discharge lights: for example, metal halide grow lights and HPS grow lights. Every HID light requires digital ballast, which is necessary in order to control electrical current within the lamp, and thus provide its seamless functioning. Supplying light with a reflector is highly recommended as well, since it allows pointing the light in proper direction and increasing the light, produced by the bulb itself. Other type of grow lights are cost-effective and lightweight LED lights, where light-emitting diodes are used to produce light in colors beneficial for keeping up plant growth. The use of any of these lamps is highly effective for hydroponics growing.

Metal halide lamps contain aluminum arc tube, filled with argon, mercury and a variety of specific metals. It is a set of different metals that provide a particular color of the light, produced by the lamp. The argon gas works to start a lamp, when electric current is introduced at the electrodes on either end inside the arc tube. Under the effect of electric current mercury and metals start to vaporize and the light is produced. The key benefit of these lamps is that being small in size they produce a significant amount of light.

HPS grow lights, also known as high-pressure sodium lights, also have an aluminum arc tube inside, similarly to metal halide lights. However, the filling of the tubes is different: in case of HPS there are sodium, mercury, and the Xenon gas inside. Both metal halide lights and HPS lights require ballast for stabilizing electric current and providing smooth performance.

LED grow lights are small, but work very efficiently providing a lot of bright light. In general, they are similar to the lights, used for decorating Christmas tree. The light is produced when electric current moves between the two crystals inside a diode, which works as semi-conductor. Furthermore, LED grow lights usually have a reflector and a lens to direct the light where it is needed.

 Along with being cost effective and energy saving, there are multiple different color spectrums to choose among in order to suit specific plants needs in the best way. So, irrespectively to what type of grow light you choose, it will work accurately and provide effective growth of your indoor plants.  

What is Hydroponic Gardening

These days, when the humanity faces many challenges, associated with natural resources depletion, bad ecology and many health problems, stemming out of the wrong food choices, it is, perhaps, the best time ever to return to natural ways of producing food for the sake of our own and our planet.

It was a common practice for our ancestors to grow fruits, vegetables, herbs and flowers for their own needs. Nowadays, the natural way of growing plants reappears with hydroponics as the particular technique, which makes plant cultivation possible even in urban areas without the use of soil. With more and more people involved, hydroponic gardening develops rapidly these days. Irrespectively to whether it is your hobby or professional activity, indoor gardening brings significant benefits for all.

Hydroponic and soil indoor gardening – The World of Gardening for the Future

If you are only making your first steps in mastering the art of hydroponic gardening, our site will become a valuable resource for you. Our hydroponic library is a source of theory on the basics of indoor plants growing, and our shop is a one-stop destination to find everything you need for your hydroponic needs, starting from vegetable seeds and wide variety of growing media to start growing your plants, and finishing with reliable equipment, such as growing lamps and climate control, to help you gather rich harvest.

The definition of hydroponics

Hydroponics most often refers to the science of growing plants (vegetables, herbs, flowers) without the use of soil. Plants are cultivated on a special growing medium, and all the nutrients, required for growing, are supplied via specially formulated nutrient solution. The primary task of any growing medium, used in hydroponic gardens, is to support plants’ roots along with retaining water. There are many books on hydroponic gardening, so if you would need to expand your knowledge in this field, please browse our Literature section or the online library for further information on hydroponics.

These are the materials that mimic the soil in everyday gardens. It serves as a support system for your hydroponic indoor garden. They function mainly for anchoring the roots and a reservoir for water and nutrient solutions. Special attention is also placed on aeration or proper plant respiration and drainage. A balance must be kept between keeping the plant nourished and over saturating the roots.

 Types of Growing Mediums

 Choice of a specific growing medium mainly depends on the type of growing system to be used. Certain systems have no mediums used because plant growth is best when roots are suspended in air or water. Improvement made with newer growing medium mixtures has been introduced for optimum plant growth in certain systems. Ideally, an equal mixture of water and air is advised making it available for the roots to utilize at all times. Water by gravity always moves downward through coarse mediums only to be deposited in the bottom of the container. This is eliminated with the use of a hydroponic system as water is constantly circulated in the system. The only system that this would not work would be the Ebb and Flow Systems.

 Clay Pebbles

Recyclables, it can be constantly reused indefinitely reducing upkeep costs for your indoor garden. Size of the pot is one limiting factor as they do not possess good nutrient lifting ability, but effectiveness is enhanced in smaller pots and containers. Another advantage would be their neutral pH and they don’t retain nutrients. Ventilation and aeration are also maximized because of the spaces created between pebbles.

Clay pebbles are usually used together with net pots in drain and flood indoor hydroponic gardening systems. Water flow in roots is enhanced by their natural shapes and spaces hey create between them, therefore maximizing the absorption of nutrients. When using the Drip irrigation hydroponic system, use absorbent mediums to provide better retention and nutrient circulation.

 Coconut Fiber

Shredded husks of coconuts as a growing medium has also been growing in popularity. Packaged in a variety of ways like blocks, pellets, cubes and shredded fiber it can be a good substitute for any type of growing medium. It is also commonly mixed with other growing media such as perlite or rockwool.

 Why Use Coconut Fiber as a Growing Medium?

 Coconut fiber is actually a waste product; its ability to be used for other useful means takes a great step towards recycling and environmental awareness. It is the first totally organic medium which could be utilized for indoor hydroponic gardening. It is superior to rockwool in water handling ability and oxygen capacity. Coconut fibers also possess root stimulating hormones and prevent root disease and fungus infection. In its natural state, coconut fibers provide a good and rich medium for the coconut when it lands in the ground.      

Special attention should be given as to the quality of the coconut fiber to be purchased. Low grade quality is not well suited for gardening as they contain high sea salt content and fine grain texture. 

Perlite

Originally used as an additive to aide aeration and improve soil drainage, it has become one of the popular hydroponic growing mediums. Commonly used with a 50/50 mix with vermiculite, it is derived from volcanic glass with holes throughout produced by exposing it to high temperatures created by water bubbles.

 Advantages of Growing with Perlite

 Inexpensive and readily available is one of the causes of its popularity. Used in wick type hydroponic systems because of its aerate nature thereby giving a good wicking action.

 Disadvantages of Growing with Perlite

 Health hazards come with the use of perlite when inhaled, a mask is suggested when working with perlite as a growing medium. A high degree of care and maintenance is also required. Water retention is one of its weakness therefore constant watering is required.

 Vermiculite

Used in conjunction with another growing medium compliments the qualities of the other. A popular and common mix is that with perlite. In a 50/50 mix vermiculites property which is water retention (200 – 300% of its weight in water) complements perlites very porous quality and a balance is achieved.

 Dangers of Using Vermiculite

 Vermiculite can be a health hazard if not handled properly. Due to its nature of containing small amounts of asbestos, it can be very dangerous when inhaled. It easily dries on an individuals fingers when touched even when wet. It is not also practical to reuse because of the rinsing and drying required. Water retention is also a problem, because of its high water retention if not used in pair with another growing medium, root damage is likely and plant death are the result.

 Rockwool

Rockwool specifically made for indoor hydroponic gardening systems. It has remained as one of the popular growing mediums. Transplanting plants when grow too big from their previous containers is also eliminated. When this happens the existing cube with the plant is merely placed on top of a larger cube and the roots would grow through both cubes. Water retention qualities of rockwool is 10 times greater that of water. Its porous nature makes it virtually impossible to over water. Recyclable, it can be used for the next crop by merely rinsing, making it economical and environment friendly.

 Disadvantages of rockwool

 A natural pH found in rockwool is one of its disadvantages, pre-treatment is required before it is used as a growing medium. Methods of lowering its alkaline content includes mixing it with a solution of pH down, trace mineral solutions and a 24 hour fish emulsion and is then rinsed thoroughly. Gloves should be used when handling rockwool because of skin irritation but is not when rockwool is wet.

A great indoor garden requires a good grow light. It could mean the difference between success and failure. Having the right hydroponic light is the single-most important and costly decision in setting up your garden.

 Hydroponic grow lights come in three main types:

Incandescent lights

These are the usual lights found in homes. They are generally a poor choice for garden grown lights because of their limited light spectrum and inefficiency.

HID (High Intensity Discharge) grow lights

Producing more light (up to 10x more lumens/watt than an incandescent light),are more efficient. Drawbacks would be, they produce more heat, generally more expensive than incandescent lights and requires the additional expense and maintenance with ballast. It takes around 100 hours before hydroponic HID grow lights reach their optimum working conditions, or until they reach light intensity and color stability. 

Natural Sunlight

Expense for acquiring artificial lights can be skipped by using sunlight. This is done with the use of solar room, greenhouse or large windows which allows plenty of sunlight. Or you can do this outdoors; hydroponics does not necessarily mean the cultivation of plants indoors but it growing plants without the use of soil.

Basic setup for an indoor garden is 1000w of lighting for and area of 16-25 square feet of plant area. Reflectors and/or light movers should also be considered as they improve efficiency of the indoor hydroponic gardening system. Ballast may also be needed as numerous hydroponic grow lighting require igniting.

 Some Basic Facts

Before plugging in your grow light

Different plants require different levels or types of lighting, this paragraph would deal on some simple know-how on how to make an effective lighting setup. In setting up your garden, it is essential that you determine your growing area in order to determine the best lighting setup for you. Light is an essential factor in the growth of plants, it is important that the lighting solution you chose for your garden is adequate for its size. A poor or ill advised decision would certainly reflect on the quality of plants you produced. Inappropriate budgeting like cost cutting specially on lighting would just prove to be uneconomical and inefficient in the long run.

A general rule for lighting that area coverage is determined by a light wattage output. Reflectors might be used to increase the light area and reach corners but effectiveness is still determined by this formula.

Day and Night Cycles

The type of plant and its stage of growth generally determine the amount of light needed. A common cycle is that with 18 hours of light and 6 hours of darkness which is recommended for its vegetative growth phase.

For seedlings, a continuous light source is needed until the first real leaves appear. When the leaves appear, the regular 18/6 light cycle is used. Fluorescent or incandescent lights are best for seedling because of the low heat and soft light they generate. Automated timers maybe used to ensure consistent light cycles. Inexpensive timers are also available; this can be found any hardware or Home Depot/ Lowe’s type store.

Light and Photosynthesis

The plants exposure to light intensity, duration and light color directly affects the amount of energy needed for photosynthesis. The color of the light, Blue simulates the summer sun, Orange for autumn seem to stimulate photosynthesis best. The light spectrum produced by metal halide bulbs (Blue lights) and high pressure sodium bulbs (red/ orange lights) produce this effects. HID grow lights produce these effects owing to their popularity to hobbyist and professionals. Combination of metal halide and high pressure sodium bulbs provides the complete spectrum of light produced by the sun.

Use Caution When Working with Lights

The combination of water, electricity and chemicals in such a closed-in space makes the grow room one of the most dangerous places in your house. Keep in mind to separate your ballast by elevating it from the water-containing areas of your hydroponic growing system. 

Fluorescent Grow Light

 Inexpensive and readily available in hardware stores and be utilized with regular light sockets. Producing less heat or none at all compared to full-size fluorescent grow lights.

Not just because of its small size and low heat output; compact fluorescent lights also produce the widest range of color spectrums to any type of lighting. It is ideal for shelf gardening due to their low heat output making the use of multiple shelves on top of each other possible. Compact fluorescent lights can be used with seedlings and small plants in a well designed hydroponic system indoor garden.

 Common Problems with Compact Fluorescent Light Bulbs

 Problems with compact fluorescent light bulbs like inefficiency and poor light penetration are common.  Several compact fluorescent bulbs maybe used and consume energy as that of one HPS bulb, but do not produce the same useable light for the hydroponic indoor garden. 

Optimizing Fluorescent Grow Lights

 With the disadvantages of comparative inefficiency compared to HID lights, several things maybe done to counteract this.

Properly matching lights to the corresponding growth cycle.

Increasing Watt ratings increases light penetration

One cheap and easy way to maximize energy consumption is by the use of reflectors. Compact fluorescent lights have a 360 degree of distribution but only 90 degrees of it can be practically used. Reflectors direct the light to corners in order to maximize the light produced.

 High Intensity Discharge Lighting

 HID light bulbs are the most after lighting system by both hobbyist and professional growers. It has made possible all-year, all-season planting for thousands of indoor gardeners and industrial nursery growers. Due to their efficiency ( 10x more light produced than conventional incandescent bulbs) and color spectrums ideal for plants have resulted to better yields and plant quality all year round. Metal Halide (MH) light bulbs mainly produce blue lights, making them ideal for plants undergoing the vegetative phase of development.

Industrial cultivators the world over are the main users of HID grow lights. HID lamps provide numerous advantages that conventional Fluorescent and incandescent lights lack. Monetary benefits abound, it boosts overall plant production giving better harvests, and environmental factors are eliminated allowing all year-round production. HID lights operate stock 110 to 220 volts AC home currents and have a standard three prong adapter to link up. HID grow lights mostly come with a ballast resistor and reflective hood.

Photosynshesis in plants allows plants them to produce their own energy. Chlorophyll in plants enables plants to convert CO2, water and energy from light to nutrients and sugars. When all this elements like CO2 and nutrients are readily and plenty in a desired surrounding, the potential for growth is bound only to the amount and quality of light available.

 High Pressure Sodium (HPS) light bulbs produce reddish light, it is ideal during the fruit phase of the plant cycle. Cooler (blue) and Warmer (orange) color spectrums raise chlorophyll production and fruit energy. The sun produces cooler lights when it is higher in the skyline, seen in the summer calendar months. It is essential for plant growth shape and keep it tight. Warmer light, experienced when the sun is lower in relative position to the skyline is important for blooming plants and during the fruit phase.

Choice of lights can also depend on the type of plants grown. Metal Halide growth lights are ideal for bushy harvests such as cabbage and vegetating herbaceous plants. Blossoming plants on the other hand is better suited by high pressure sodium growth lights. Conversion light bulbs are also available for different organizations. More expensive than other lights, conversion lamps give that extra advantage of starting your plants with a metal halide growth light giving taut, small development and being replaced by high pressure sodium light bulbs when the fruit stage of the plant is reached. Recent developments have introduced convertible ballast resistors for regular metal halide growth lights and high pressure sodium light bulbs.

HID grow lights main advantage is that it eliminates such factors as climate, temperature and time of day. Season dependent plants can be grown throughout the year; they provide an alternative to solar light. For those who are garden and flower hobbyists, this would be a plus.

Hydroponic growth lights also gives you control over light exposure. Allowing us to hasten a plants growth or that flower to bloom. Ideal light color, duration and concentration are the key factors in growing those choice plants.

 High Pressure Sodium Bulbs 

A clear ceramic arc tube suspended inside a glass bulb characterizes High Pressure Sodium Bulbs. Xenon gas is the main component inside the inner tube which is then ignited to produce an arc of light. Sizes range fro 35 watts up to 1000 watts. The most popular of which are the 250 watts, 400 watts and 1000 watts.

 Advantages of High Pressure Sodium Bulbs

 Efficiency is one of its advantages; they provide the best light penetration and have strong light spectrums necessary for plant growth. Mainly producing red and yellow lights or little or no blue lights, they mimic the autumn sun. Popularity for HPS lights are mainly attributed to their low energy to light ratio and is the most economical and efficient than any other type of lighting system. HPS lights work best during the flowering or fruit stage of the plant growth cycle.

 Disadvantages of HPS High Pressure Sodium Bulbs

 High Pressure Sodium Bulbs produce great amounts of heat. Proper ventilation and good garden construction and planning help to offset this negative effect. Like all HID growth light systems price is the main drawback compared to fluorescent lights. HPS lights are currently more cost effective compared to other HID growth light systems.

High Pressure Sodium Light bulbs are replaced after 24 months to ensure their and your gardens efficiency.

 Metal Halide Bulbs

 Metal Halide bulbs are constructed by placing an inner arc tube inside vacuum-sealed glass tubing. Electric currents passed through the inner arc which in turn ignites mercury and iodide materials in the tube.

 Advantages of Metal Halide Bulbs

 Metal Halide Bulbs mimic sunlight during summertime. Producing a blue spectrum of light most ideal for plants in their vegetative growth phase. They are also a good choice for indoor hydroponic garden systems because of their efficiency in producing light.

 Other Metal Halide Bulb Information

 Available from 70 to 1500 watts, Metal Halide bulbs present a wide variety of choices. Most popular and commonly used are the 250, 400 and 1000 watts metal halide bulbs. Ballast specifically tailored for each bulb is also essential. Mounting positions depend on its specific bulb type (marks or guides are usually provided). HOR bulbs are mounted horizontally, BU/BD is vertically mounted and U (universal) bulbs could be mounted either way. The vertical position is the most ideal and provides utmost efficiency.

Along with water,  hydroponics plant nutrients, Co2 and oxygen, grow lights is the key basic component, required by plants to live. Providing additional light is necessary for indoor gardening. Furthermore, light should resemble the sunlight as much as possible. In order to achieve that goal several types of lights are used: incandescent, fluorescent, high intensity discharge or HID lamps and sulfur lights. While there are many other types of lighting, only the mentioned above are recommended for indoor gardening. The major concern with other types of lights is that they do not produce light in the appropriate spectrum, required by plants.

Though typical widely used incandescent lamps fit any ordinary light socket, this type of lighting is considered to be the least effective in lighting your garden in comparison with other types of lighting. Incandescent lights produce light in the red spectrum; that is why such lamps are commonly covered with a blue coating in order to increase the amount of blue spectrum in the produced light. In general, incandescent lights are considered to be poor options for indoor gardening needs.

In comparison with incandescent lamps, fluorescent lights produce more light with lower energy consumption. However, the light, produced by fluorescent lamps, is not intensive enough and cannot penetrate more than 6” – 8”. Light, produced by fluorescent lamps, is usually simply insufficient to provide normal growing of plants, vegetables and flowers. The only application, where it is possible to use fluorescent light, is growing seedlings, cuttings, or some particular plants with low light requirements, such as orchids.

High intensity discharge lights, also known as HID lights, are currently the most effective lights for indoor gardening. Metal halide (MH) and high pressure sodium (HPS) grow lamps are two major types of HID lights. Each type produces light in a particular range: for example, metal halide lights generate blue spectrum light similar to the full summer sun, and high pressure sodium lights produce light in red and yellow spectrum, resembling the autumn sunlight. 

Though high pressure sodium lamps usually are more expensive (by about 10%-20%) than metal halide lamps, they are more durable with extended lifecycle. Besides, HPS lights feature higher lumen output (97-150 lumens per watt consumed) and lose only about 5% of their brightness after one year of use (for comparison, MH bulbs produce about 70-115 lumens per watt and  lose up to 15-20% of their initial brightness within a year). 

Irrespectively to the particular type of lighting in use, it is recommended to replace lights on the timely manner: MH bulbs – after 12-18 months, and HPS bulbs – after 24 months of work. Basically, metal halide lamps is the more preferred type of lighting for plants, when they grow, and high pressure sodium lamps suit best for flowering plants. However, the discussion on which type of lighting is best is still open among gardeners. Each type of lights offers its own advantages, as well as disadvantages, so it is often a matter of personal choice, preferences, growing environment and needs. The scope of this article is to provide plain information on the available types of lighting for indoor hydroponic gardening, while leaving readers enough space for personal decisions on which product to prefer.  By the way, recently a new type of lights appeared. The so-called conversion systems allow switching between MH and HPS lights when it is necessary simply by changing the bulb. Though this type of lighting offers certain benefits, conversion systems are still pretty expensive. More information on particular types of HID grow lights used in hydroponics systems will be provided in the next set of hydroponics guides.

Buying flowers and vegetables in the garden centers or greenhouses is undoubtedly comfortable. However, starting his own seeds at home, a gardener has a chance to grow unusual and not those popular plants, many of which can rarely be found in the garden centers. To successfully start the seeds a grower should choose a southern exposure window with much sunlight. Still, it may be necessary to purchase cool-white fluorescent grow lights. Commercial mix may be the best variant of the medium, which is healthy and free from any insects.

One of the best-known mediums for starting seeds is Natural Beginnings Seed-Starting Mix from Gardens Alive, which gained several awards for its great performance. It gives better rates, as well as speed of seeds germination. It is reasonable to choose those seeds for indoor starting that are difficult to start in the garden; otherwise you would be able to just sow them in the garden.

To properly control seeds starting, it is necessary to know how many days it takes for them to germinate. This data can be found either on the packaging, or at www.savygardener.com. Web sites usually give information on many plants seeds and include the description of the best timing to sow seeds of this or than plant. Do not forget to gradually adjust the seedlings to the outside air. They are usually recommended to be planted in the garden after Memorial Day.

One more important thing to remember is that the smaller the seeds are the closer to the soil surface they should be planted. Besides light and air your seeds will also need warmth. It is thus beneficial to place a heating pad under the seeds tray or container. Hydrofarm Company offers its special product for starting seeds called the Germination Station. It consists of a 72-cell insert for the plants seeds and a humidity dome. The 10-inch by 20-inch tray is lined with a thin electric heating unit at the bottom. This allows to significantly increasing germination rates.

The detailed description of the correct seeds planting may seem a difficult task to complete. However, it is worth trying; and even if you start with only several seeds, you will definitely enjoy observing the starting of the new plant growth

We welcome everyone, who is willing to grow herbs, plants and flowers inside the house. It is so easy to get lost among the large number of sources about the indoor gardening; that is why, we will do our best to give you the most important and easy to understand information before you start.

HOW TO CHOOSE A PLACE FOR HYDROPONIC GARDEN?

The very first and the most important task for you to do is to choose a place in your house, where you will make a garden. Actually, any free space, whether it is a closet or a basement, will do. You will need 250 Watt – 400 Watt high pressure sodium or halide light for not less than about 6 feet (150-180cm) of grow room height to avoid the growing place overheating. These lights are enough to properly light up the space of about square meter.

 WHAT DO I NEED TO START INDOOR GARDENING?

Hydroponics belongs to those avocations, which, along with requiring much time, knowledge, and skills, will need good equipment to be successful and satisfying. Here belong inert hydroponic media, hydroponic system, either natural or artificial source of light, hydroponic nutrients and, actually, plants. 

COULD YOU, PLEASE, EXPLAIN WHAT HYDROPONICS MEAN?

Hydroponics is an art of growing plants using a nutrient rich solution instead of soil.

ARE THERE ANY REQUIREMENTS TO THE PLACE FOR HYDROPONICS?

The trickiest and the best thing about hydroponics is the possibility to grow plants everywhere: inside or outside the house, as well as in a greenhouse. To tell the truth, any plant can be grown with the help of hydroponic method, though some herbs may require more skills from the gardener to grow well.

 WHAT DOES AEROPONICS MEAN?

Aeroponics is another way for the gardeners to get rich crops. In this case the infusions of oxygen into the nutrient solution are used to hasten plants growth.

ARE HYDROPONIC PLANTS ORGANIC OR NOT?

For the time being, the question whether hydroponics is organic remains debatable for many people. However, a large number of gardeners are definitely the advocates of this statement. Hydroponics uses the methods of direct supplying all the necessary minerals to the plants without growing them in the soil. It is a proven fact that the yields obtained in this case are much richer and of better quality than those received from any other organic method of plants growing. 

WHAT IS THE KEY BENEFIT OF HYDROPONICS OVER SOIL CULTIVATION?

Having the possibility to adjust the rate of nutrients required for plants optimal growing, hydroponic gardeners manage to achieve the best growth rates and increased crops volume for the shortest period of time.

IS IT TRUE THAT HYDRPONIC PRODUCTS HAVE DIFFERENT TASTE THAN THE SAME PRODUCTS, GROWN ON SOIL?

Taste, flavor, and nutrition rate of hydroponic produce often surpass those of the soil grown produce, due to the fact that nutrients, necessary for the plants, are easily accessible for them at the time when plants need them the most. 

WHAT MINERAL ELEMENETS IN PARTICLUAR ARE NEEDED FOR PLANT GROWTH?

To succeed in the plants growing a gardener should know what elements are essential for the plants. Here belong those provided by water and air: oxygen (O), hydrogen (H), and carbon (C); several others are available for the plants from soil or growing medium: calcium (Ca), iron (Fe), phosphorus (P), magnesium (Mg), nitrogen (N), sulfur (S) and potassium (K); as well as some others, determined as essential not so long time ago: zinc (Zn), molybdenum (Mb), copper (Cu), chlorine (Cl), manganese (Mn) and boron (B).

Temperature is a gauge for optimum production for every plant. When plants are exposed to extreme ranges of temperature, stunted growth and poor fruit yields are the result. Plants have specific temperature ranges for their ideal growth. Warm-season vegetables and most types of flowers have 18o C and 260 C as an ideal temperature range. Cooler season vegetables like lettuces have a 10o C to 18o C range.

Garden Climate Controller

Environment greatly affects plant growth. Environmental factors such as temperature, climate and CO2 levels are just examples. Garden climate controllers give you control over this variables and keep them at ideal ranges for optimum growth of plants.

Basic Garden Climate Controller

The cheap and basic garden climate controller usually control temperature and humidity and turn exhaust fans when needed. CO2 controls could be installed together with them for a small additional charge. This combination is more economical allowing you control over all environmental factors without spending hundreds of dollars for more sophisticated setups not needed. Indoor hydroponic garden systems can be maintained with this basic setup.

Complete Garden Climate Controller

Complete control over CO2 system is another advantage presented by the use of the complete hydroponics garden climate controller. Controllers also allow for coordinated infusion of carbon dioxide with exhaust fans giving minimum waste of CO2.

Other “extras” found with garden climate controllers:

Additional outlets activates when lights are off allowing a “night mode” setup.

Flood Sensors that prevent common gardening mishaps by shutting down the system.

Photo sensors recognize natural sunlight and power ups the “night mode.” This makes the setup more efficient and economical as grow lights are only utilized when needed.